Contact Us

Contact: Jinchun Du
Mob: +8613506161985
Contact: Tony Gao
Mob: +8613812107230
Tel: +86-510-86151034
Fax: +86-510-86012118

Address: Yun Gu Road No.3, Yunting Town,Jiangyin City,Jiangsu Province,China

Home > Knowledge > Content
Stainless steel turbine pulverizer structure composition and working objects and characteristics
Sep 06, 2018

From the structural point of view, the stainless steel turbine pulverizer consists of the main organic shell, machine door, turbine, main shaft, screen, pulley and motor. When the turbine is pulverized, the motor drives the spindle and the turbine to rotate at a high speed. The grinding block on the turbine and the screen ring constitutes a crushing and grinding pair. When the material enters the machine cavity from the hopper, the material closely rubs and strongly impacts on the inner side of the blade of the turbine in the swirling airflow of the turbine, and Grinding again in the gap between the grinding block.


While the stainless steel turbo crusher pulverizes the material, the turbine draws in a large amount of air, which acts to cool the machine, grind the material, and transport the fine material. The fineness of the material pulverization depends on the nature of the material and the size of the screen, as well as the throughput of the material and air.


The bearing components of the stainless steel turbine pulverizers are equipped with a special labyrinth seal that effectively prevents dust from entering the bearing cavity, thus extending the life of the bearing. The machine door is equipped with a silicone rubber sealing ring, which is free of dust and pollutes the operating environment.


With its strong crushing ability, low energy consumption, small product relative fineness, large crushing space and high crushing efficiency, stainless steel turbo crusher is mainly used for crushing and processing of medium and low hardness materials such as pharmaceutical, chemical and food. Between -150 mesh adjustment, it has the advantages of high output, fine grain size, low noise, low energy consumption, simple maintenance and convenient installation. It is especially suitable for the crushing of low hardness materials such as oiliness, viscosity, heat sensitivity and fiber.

Previous: Configuration characteristics and design flow of screw extruding granulator

Next: Types of vibro fluidized bed dryers and their corresponding features and uses