Contact Us

Contact: Jinchun Du
Mob: +8613506161985
Contact: Tony Gao
Mob: +8613812107230
Tel: +86-510-86151034
Fax: +86-510-86012118

E-mail: 13812107230@163.com
Address: Yun Gu Road No.3, Yunting Town,Jiangyin City,Jiangsu Province,China

Home > Knowledge > Content
Skills for Spice Fine Powder Grinder
Jan 21, 2019

The operator of the Spice Fine Powder Grinder must be familiar with the structure and performance of the equipment. After the equipment is powered on, it should be in good working condition with no abnormal noise. Otherwise, stop the inspection. In the process of processing, it is necessary to add abrasives and control the amount of water added according to the grinding conditions. When the work is finished, stop the power supply, clean the equipment, and do the equipment maintenance work.

 

Before the spice Spice Fine Powder Grinder is turned on, the staff needs to check whether the fastening screws are intact and whether the rotation of the motor shaft is flexible. When the equipment is in operation, it should be stopped if it finds an abnormality. The main engine empty load test operation is in accordance with the steering requirements, and its operation time is not less than 1h. The test load of the main engine should be stable and the maximum temperature of the lubricating oil should not exceed 800c. The temperature rise must not exceed 400c.

 

The load test operation can be performed only when the components of the Spice Fine Powder Grinder can work normally when the dry load test operation is good. The load test run time is not less than 8h (hours). The mill should work normally, and the transmission part must not have abnormal sound and shock vibration. After passing the air load and load test run, tighten the fasteners again and put them into normal operation.

 

 http://www.nf-drying.com


Previous: Two advantages of vibro fluidized bed dryer

Next: Vacuum disc continuous dryer features