Contact Us

Contact: Jinchun Du
Mob: +8613506161985
Contact: Tony Gao
Mob: +8613812107230
Tel: +86-510-86151034
Fax: +86-510-86012118

E-mail: 13812107230@163.com
Address: Yun Gu Road No.3, Yunting Town,Jiangyin City,Jiangsu Province,China

Home > Knowledge > Content
Composition of major core systems in high speed centrifugal atomizing dryer
Aug 27, 2018

The high speed centrifugal atomizing dryer is composed of feeding, medium circulation, air heating purification, dryer, control, receiving and other systems. The feeding system of the high-speed centrifugal spray dryer adopts frequency conversion speed regulation, which can effectively control the feeding amount; the main part of the pipeline valve is SUS304 stainless steel material, which is clean and hygienic.

 

The medium circulation system is composed of a blower, an induced draft fan, a wind regulating butterfly valve, a duct, and the like; the air heating and purifying system is composed of an initial and intermediate effect air filter, a fan, a heater, and the like. The core system dryer of the high-speed centrifugal spray dryer consists of a drying host, a hot air distributor, an atomizer, an observation hole, a lighting device, and a pneumatic hammer.

 

The atomizer uses a frequency converter to adjust the speed of the atomizer to achieve the best atomization effect; the pneumatic hammer uses a new product with a Teflon head to ensure the vibration effect and reduce the product when tapping. The noise is also well distributed. The hot vortex of the main engine adopts a logarithmic spiral acceleration structure, so that the hot air effectively presses the material when entering the tower, and the ordered swirling decreases. The hot air distributor also combines the characteristics and requirements of the technology, so that the air guide mechanism is provided on both sides of the distributor, and the angle can be adjusted arbitrarily.

 

The control system of the high speed centrifugal atomizing dryer consists of main control components, programmable controllers, fuzzy controllers, etc. The receiving system consists of a cyclone separator and a water film dust collector, so that the whole unit can provide more than two materials for normal operation. Production, to ensure material quality, control material temperature, convenient for direct packaging.

 

http://www.nf-drying.com/


Previous: The use of pressure spray granulation drying machine and its parameter requirements

Next: Atomization mechanism of air stream spray dryer and its application range