Contact Us

Contact: Jinchun Du
Mob: +8613506161985
Contact: Tony Gao
Mob: +8613812107230
Tel: +86-510-86151034
Fax: +86-510-86012118

Address: Yun Gu Road No.3, Yunting Town,Jiangyin City,Jiangsu Province,China

Home > Knowledge > Content
Adapted materials and vibration of vibro fluid bed dryer
Oct 10, 2018

When the vibro fluid bed dryer is operated, its material enters the machine from the inlet of the feed. Under the action of the vibration force, it will effectively throw the throwing along the fluidized bed of its horizontal plane, continuously move forward, and the hot air will flow upward through the fluidization. After the bed is exchanged with the wet material, the humid air is discharged by the cyclone 1:3 after the dust is removed by the cyclone, and the dry material is discharged from the discharge inlet.


Adaptable materials for vibro fluid bed dryer

It is suitable for drying and cooling of powdery and granular materials in chemical, pharmaceutical, food, dehydrated vegetables, grain, minerals and other industries. Such as: citric acid, monosodium glutamate, borax, ammonium sulfate, compound fertilizer, radish, silk, soybean meal, distiller's grains, seeds, slag, sugar and so on.


Performance characteristics of vibro fluid bed dryer

1. The vibration source of the vibrating fluidized bed dryer is mainly driven by a vibration motor, which is stable in operation, convenient in maintenance, low in noise and long in life.

2. The fluidization is well-proportioned, without dead space and blow-through phenomenon, uniform drying and cooling of the product can be obtained.

3. It has good adjustability and is applicable to the surface width to a certain extent. The thickness of the material layer and the moving speed in the machine and the full amplitude change can realize stepless adjustment.

Previous: High speed centrifugal spray drying machine fluidity and adjustment requirements

Next: Factors affecting the performance of double conical revolving vacuum dryer